This kit is the Spectrum Communications TRC4-10sl 4m Transverter designed to transvert a 10m (28MHz) signal to 4m (70MHz). It has an output of approximately 25W due to the inclusion of a separate PA board and has a maximum input of 5W. Minimum input is 500mW.
This is a really nice kit to build using quality components and preformed coils. There are no toroids to wind. It comes with a black metal enclosure which has a printed front panel giving a professional finish to the kit. The transverter is used with a Yaesu FT-897D, with its output power reduced to 5W. The transverter switches to transmit by sensing the RF power from the FT-897D when the PTT on the microphone is pressed.
The transverter has an output power control and a receive gain control. Normally both LEDs are red, but I changed the PWR LED for a green one - just a personal preference. For final calibration the completed unit was sent to Spectrum Communications as I didn't have an accurate enough power meter for 70MHz in order to correctly commission the unit at home.
73
Mick M0GWD